Physicochemical interaction of rifampicin and ritonavir-lopinavir solid dispersion: an in-vitro and ex-vivo investigation.

OBJECTIVE: To investigate the in-situ physicochemical interaction of Rifampicin and Ritonavir - Lopinavir Solid dispersion administered for the treatment of comorbid conditions i.e. Tuberculosis and HIV/AIDS. METHODS: pH-shift dissolution of Rifampicin (RIF) in presence of Ritonavir-Lopinavir solid dispersion (RL-SD) was carried out in USP phosphate buffer 6.8 and FaSSIF. Equilibrium and amorphous solubility were determined for the drugs. Pure drugs, their physical mixtures, and pH-shifted co-precipitated samples were characterized using DSC, PXRD, and FTIR. Fluorescence spectroscopy was used to investigate drug-rich and drug-lean phases. In-vitro and ex-vivo flux studies were also carried out. RESULTS: The results showed significant differences in the solubility and dissolution profiles of RTV and LOP in the presence of RIF, while RIF profile remained unchanged. Amorphicity, intermolecular interaction and aggregate formation in pH-shifted samples were revealed in DSC, XRD and FTIR analysis. Fluorescence spectroscopy confirmed the formation of drug-rich phase upon pH-shift. In-vitro and ex-vivo flux studies revealed significant reduction in the flux of all the drugs when studied in presence of second drug. CONCLUSION: RIF, RTV and LOP in presence of each other on pH-shift, results in co-precipitation in the amorphous form (miscible) which leads to reduction in the highest attainable degree of supersaturation. This reduction corresponds to the mole fraction of the RIF, RTV and LOP within the studied system. These findings suggest that the concomitant administration of these drugs may lead to physicochemical interactions and possible ineffective therapy.

Molecular Insights into the Mechanism of Modulatory Effects of Proton Pump Inhibitors on P-glycoprotein Mediated Drug Transport of Palbociclib and Ribociclib.

BACKGROUND: Palbociclib and ribociclib are substrates of efflux transporter P-glycoprotein which plays a key role in absorption and transport of these drugs. Proton pump inhibitors, when co-administered with them are known to show inhibitory effect on P-glycoprotein. OBJECTIVE: Therefore, this study aims to investigate the role of proton pump inhibitors in inhibition of P-glycoprotein mediated efflux of palbociclib and ribociclib. METHOD: A combined approach of molecular docking and ex vivo everted gut sac model was implemented to predict the potential of proton pump inhibitors i.e., omeprazole, esomeprazole, lansoprazole, pantoprazole and rabeprazole to inhibit the P-glycoprotein mediated intestinal transport of palbociclib and ribociclib and study the molecular basis of interaction taking place. RESULTS: Molecular docking studies revealed that omeprazole, rabeprazole and pantoprazole bound to the ATP site of nucleotide binding domain with binding energies of -27.53, -29.56 and -38.44 Kcal/mol respectively. In ex vivo studies, rabeprazole and omeprazole, affected the absorptive permeability of palbociclib by 3.04 and 1.26 and ribociclib by 1.76 and 2.54 folds, respectively. Results of molecular docking studies and ex vivo studies highlighted that proton pump inhibitors bound to the ATP binding site to block its hydrolysis thereby inhibiting the P-glycoprotein mediated efflux of palbociclib and ribociclib. CONCLUSION: The experimental evidence presented highlights the fact that proton pump inhibitors have potential to inhibit P-glycoprotein, giving rise to drug interactions with palbociclib and ribociclib. Hence, monitoring is required while proton pump inhibitors and cyclin-dependent kinase inhibitors are being co-administered to avoid adverse events.

A computational-based approach to fabricate Ceritinib co-amorphous system using a novel co-former Rutin for bioavailability enhancement.

In this study, we used molecular simulations to design Ceritinib (CRT) co-amorphous materials (CAMs) with concurrent improvement in solubility and bioavailability. Computational modeling enabled us to select the co-former by estimating the binding energy and intermolecular interactions. Rutin (RTH) was selected as a co-former for CRT CAMs using the solvent evaporation method to anticipate simultaneous improvement of solubility and bioavailability. The solid state characterization using DSC, XRPD, FT-IR, and a significant shift in Gordon Taylor experimental Tg values of co-amorphous materials revealed single amorphous phase formation and intermolecular interactions between CRT and RTH. The co-amorphous materials exhibited physical stability for up to 4 months under dry conditions (40 °C). Further, co-amorphous materials maintained the supersaturation for 24 hrs and improved solubility as well as dissolution of CRT. CRT:RTH 1:1 CAMs improved the permeability of CRT by 2 fold, estimated by employing the everted gut sac method. The solubility advantage of CAMs was also reflected in pharmacokinetic parameters, with a 3.1-fold and 2-fold improvement of CRT:RTH 2:1 in CRT exposure (AUC 0-t) and plasma concentration (Cmax) compared to the physical mixture, respectively.

Exploring the Solubility and Bioavailability of Sodium Salt and Its Free Acid Solid Dispersions of Dolutegravir.

Amorphous salt solid dispersion (ASSD) of Dolutegravir amorphous salt (DSSD) was generated using quench cooling and compared to its Dolutegravir free acid solid dispersion (DFSD) to improve the solubility and bioavailability. Soluplus (SLP) was used as a polymeric carrier in both solid dispersions. The prepared DSSD and DFSD, physical mixtures, and individual compounds were characterized by employing DSC, XRPD, and FTIR to assess the formation of the single homogenous amorphous phase and the existence of intermolecular interactions. Partial crystallinity was observed for DSSD, unlike DFSD, which is completely amorphous. No intermolecular interactions were observed between the Dolutegravir sodium (DS)/Dolutegravir free acid (DF) and SLP from the FTIR spectra of DSSD and DFSD. Both DSSD and DFSD improved the solubility of Dolutegravir (DTG) to 5.7 and 4.54 folds compared to the pure forms. Similarly, drug release from DSSD and DFSD was 2 and 1.5 folds higher than that in the pure form, owing to the rapid dissolution of the drug from the formulations. The permeability of DSSD and DFSD was estimated using the dialysis membrane, which enhanced the DTG permeability. The improvement in in vitro studies was translated into in vivo pharmacokinetic profiles of DSSD and DFSD, where 4.0 and 5.6 folds, respectively, improved the Cmax of DTG.

Effervescence-induced amorphous solid dispersions with improved drug solubility and dissolution.

The current study aimed to investigate drug carrier miscibility in pharmaceutical solid dispersions (SD) and include the effervescent system, i.e. Effervescence-induced amorphous solid dispersions (ESD), to enhance the solubility of a poorly water-soluble Glibenclamide (GLB). Kollidon VA 64, PEG-3350, and Gelucire-50/13 were selected as the water-soluble carriers. The miscibility of the drug-carrier was predicted by molecular dynamics simulation, Hansen solubility parameters, Flory-Huggins theory, and Gibb's free energy. Solid dispersions were prepared by microwave, solvent evaporation, lyophilization, and Hot Melt Extrusion (HME) methods. The prepared solid dispersions were subjected to solubility, in-vitro dissolution, and other characterization studies. The in-silico and theoretical approach suggested that the selected polymers exhibited better miscibility with GLB. Solid-state characterizations like FTIR and 1H NMR proved the formation of intermolecular hydrogen bonding between the drug and carriers, which was comparatively higher in ESDs than SDs. DSC, PXRD, and microscopic examination of GLB and SDs confirmed the amorphization of GLB, which was higher in ESDs than SDs. Gibb's free energy concept suggested that the prepared solid dispersions will be stable at room temperature. Ex-vivo intestinal absorption study on optimized ESDs prepared with Kollidon VA64 using the HME technique exhibited a higher flux and permeability coefficient than the pure drug suggesting a better drug delivery. The drug-carrier miscibility was successfully studied in SDs of GLB. The addition of the effervescent agent further enhanced the solubility and dissolution of GLB. Additionally, this might exhibit a better bioavailability, confirmed by ex-vivo intestinal absorption study.

Thiopurine therapy in inflammatory bowel disease in the pandemic era: Safe or unsafe?

BACKGROUND: Inflammatory bowel disease (IBD) is a chronic inflammatory condition of the gastrointestinal tract. Crohn's disease (CD) and Ulcerative colitis (UC) are the two major types affecting millions across the globe. Various immunomodulatory drugs consisting of small molecules (thiopurines, methotrexate and tofacitinib) and biologics are used to treat IBD. Thiopurines (TP) are widely used in the treatment of IBD and it plays an important role both alone and in combination with anti-TNF agents as IBD maintenance therapy. Although the advent of biologics therapy has significantly advanced the management of IBD, TP remains the mainstay of treatment in resource-limited and low economic settings. However, the recently commenced pandemic has raised uncertainty over the safety of the use of immunosuppressant drugs such as TP among healthcare care providers and patients, as there is a scarcity of data on whether IBD patients are at higher risk of COVID-19 infection or more prone to its severe outcomes. AIM: This review aims to encapsulate evidence on the risk of COVID-19 infection and its severe prognosis in IBD patients on TP. Additionally, it also evaluates the role of TP in inhibiting the viral protease, a potential drug target, essential for the replication and pathogenesis of the virus. CONCLUSION: Emerging evidence suggests that TP therapy is safe during the current pandemic and does not carry an elevated risk when used as monotherapy or in combination with other IBD drugs. In-vitro studies demonstrate that TP is a potential therapeutic for present and future betacoronavirus pandemics.

Occurrences of UV filters, endocrine disruptive chemicals, alkyl phenolic compounds, fragrances, and hormones in the wastewater and coastal waters of the Antarctica.

We present a simplified status description of the prevalence and occurrences of organic micropollutants including endocrine disruptive chemicals (EDCs), therapeutic drugs, hormones, fragrances and ultraviolet (UV) filters in the wastewaters and the adjacent coastal oceans in the Northern and Southern Antarctica. Different treatment technologies adopted in the research stations and their efficacy in removing pharmaceuticals and personal care products (PPCPs) are reviewed. Till date, 56 PPCPs are reported in the wastewaters of Antarctic research stations, and 23 in the adjacent coastal waters and sea ice. The reported concentrations in the wastewaters are at the levels of µg L-1 for UV filters, plasticizer Bisphenol A, metabolites, antibiotics, alkyl phenolic compounds, and stimulants. Concentrations in the coastal waters and sea ice are two orders of magnitude lower than the wastewaters because of dilution and degradation. It is apparent however, that the PPCP-laden effluents discharged from the research stations contaminate them. If left unchecked, pollution of the coastal waters and sea-ice can lead to toxic levels. Through this review, we have established widespread occurrence of PPCPs in the polar coastal oceans; this study will also provide the status quo for the researchers and policymakers to seriously consider the issue and initiate remedial action in the near future. The existing substantial gaps in understanding of the impact of PPCPs on the flora and fauna of Antarctica, and the ineffectiveness of the current treatment technologies adopted by the research stations are highly evident. Future-oriented polar research should focus on protecting the pristine ecosystem by utilizing climate-sensitive, cost-effective treatment technologies.

Raloxifene HCl - quercetin co-amorphous system: preparation, characterization, and investigation of its behavior in phosphate buffer.

PURPOSE: Raloxifene HCl (RLX), a practically insoluble drug used in the treatment of osteoporosis in post-menopausal women; was modified at its molecular level to enhance its solubility using co-amorphous technology. METHODS: In this study, RLX was co-amorphized with Quercetin (QCT; a nutraceutical flavonoid) using solvent evaporation (SE), quench cooling (QC), and ball milling (BM) techniques. The prepared co-amorphous systems (CAMs) were characterized using XRD, DSC, and FT-IR. For the simultaneous analysis of RLX and QCT, an RP-HPLC method was developed to quantify the drugs in the prepared systems. Behavior in aqueous media was investigated by studying amorphous and equilibrium solubility, and drug release of RLX using USP phosphate buffer pH 6.8. RESULTS: Solvent evaporation (RQ(SE)) was able to produce a homogeneous system, where quench cooling showed thermal degradation of the drug, and ball milling was not able to amorphize the blend. From the DSC results, it was found that RQ(SE) was able to increase the glass transition temperature by 40 °C. It was observed that the solubility of RLX reduced, as RLX formed phosphate aggregates in the buffer media which further formed complexes with QCT; this was determined by investigating the residual particles from solubility studies. Though the solubility was reduced, drug release of RQ(SE) exhibited improvement in concentration by 2.3 times. CONCLUSIONS: RQ(SE) formed a stable CAM; though the solubility of RLX in presence of QCT reduced, from the drug release study, it was apparent that the co-amorphous technique improved the concentration of RLX.

Identification of Novel Impurity of Ziprasidone.

Ziprasidone hydrochloride is a second-generation antipsychotic drug employed for the treatment of schizophrenia and acute mania or mixed episodes associated with bipolar disorder. During the scale-up of ziprasidone hydrochloride, an unknown impurity was observed in the batches ranging from 0.10% to 0.15% by HPLC-UV analysis. The structure of an unknown impurity was proposed as 3,3'-methylenebis(5-(2-(4-(benzo[d]isothiazol-3-yl)piperazin-1-yl)ethyl)-6-chloroindolin-2-one) which is named as methylene ziprasidone dimer (MZD impurity). It was isolated from an enriched sample by preparative HPLC, and its structure was elucidated by comprehensive analysis of HRMS, 1D NMR (1H, 13C), DEPT-135, 2D NMR (COSY, HSQC, HMBC) spectroscopy. A plausible mechanism for the formation of isolated impurity is proposed.

Full Factorial Design for Development and Validation of a Stability-Indicating RP-HPLC Method for the Estimation of Timolol Maleate in Surfactant-Based Elastic Nano-Vesicular Systems.

A novel isocratic stability-indicating chromatographic method was developed, optimized and validated using Design-Expert® following ICH guidelines for the quantification of Timolol maleate (TM). The intrinsic stability of TM was assessed by force degradation studies, which concluded no extensive degradation except under alkaline and oxidative conditions. TM was quantified accurately in the surfactant-based elastic vesicular system by separating it on Hypersil BDS C8 column using triethylamine in H2O (0.15%v/v; pH 3.0) and acetonitrile (ACN; 65:35%v/v). The influence of variable factors like mobile phase pH, injection volume (µL), flow rate (mL/min) and ACN content (%) on method responses were assessed using a full factorial design. The method was linear between 0.05 and 10 µg/mL with an R2 value of 0.9993. Limit of detection and limit of quantification were found to be 0.90 and 27.2 ng/mL. The method was specific, with recovery in plain drug solution of 89-92% and elastic nanovesicles of 90-93%. The experimental model was significant (P < 0.0001) as indicated by deliberate changes in the method analyzed through analysis of variance. The total drug content in elastic nanovesicles was estimated to be 9.53 ± 0.01 mg/20-mL dispersion and entrapment efficiency was 44.52 ± 0.73%. The developed method was rapid, economic and precise for the quantification of TM in bulk and vesicular system.

Liquid chromatographic methods in the determination of inosine monophosphate dehydrogenase enzyme activity: a review.

Inosine monophosphate dehydrogenase (IMPDH) is a crucial enzyme involved in the de novo synthesis of purine nucleotides. IMPDH activity is used to evaluate the pharmacodynamics/pharmacokinetics of immunosuppressant drugs such as mycophenolic acid and thiopurines. These drugs are often used to prevent organ transplant rejection and as steroid-sparing agents in autoinflammatory diseases such as inflammatory bowel disease and rheumatoid arthritis. Numerous analytical techniques have been employed to evaluate IMPDH activity in biological matrices. However, hyphenated LC techniques were most widely used in the literature. This review focuses on hyphenated LC methods used to measure IMPDH activity and provides detailed insight into the sample preparation techniques, chromatographic conditions, enzymatic assay conditions, detectors and normalization factors employed in those methods.

Bioanalytical method development and validation of highly selective and sensitive LC-MS/MS method for determination of teriparatide (parathyroid hormone fragment 1-34) in human serum through direct detection of intact teriparatide molecule.

Teriparatide is a novel recombinant peptide fragment of the first 1-34 amino acids of human parathyroid recommended for treatment of osteoporosis. Therapeutic proteins and peptides are routinely estimated using ligand binding assay formats however LC-MS/MS technique which is routinely used in bioanalysis of small molecules has now gained importance in large molecule bioanalysis for the advantages it can offer over LBAs in terms of improved accuracy, selectivity and anti-body free method development. This paper presents a sensitive bioanalytical method for determination of teriparatide in human serum using ultra performance liquid chromatography aligned with tandem mass spectrometric detection. Teriparatide was isolated from human serum using solid phase extraction. The intact peptide was separated on a chromatograph and the multiply charged ion (+7) was detected using a mass spectrometer. The total run time was 4.0 min. The internal standard used was rat PTH 1-34 fragment. The mass transitions of m/z 589.3 > 656.3 for teriparatide and m/z 677.4 > 778.6 for internal standard were used for MS/MS detection. The sample extraction involved a solid phase extraction method followed by concentration of the eluent by evaporation and subsequent reconstitution. The non-specific binding effect caused by the adherence of the peptides/proteins to the vials/tube walls was significantly reduced by using BSA solution as blocking agent. The method has been validated over a linear range of 15.07-913.3 pg/mL with a correlation coefficient ≥ 0.99. The precision (%RSD) was 6.36 to 10.85 and accuracy was within 96.71% to 100.88%. A two-treatment, two-period, cross over study was conducted to establish bioequivalence between test and reference formulation (20 mcg/80 mL - solution for injection) and the method was successfully applied to quantify teriparatide in serum samples of this clinical study and about 1220 human serum samples were analyzed to determine teriparatide. This method is a promising anti-body free LC-MS/MS based methodology for estimation of teriparatide in human serum and may be applied as starting method for other such peptide molecules.

A selective and sensitive UPLC-ESI-MS/MS method for quantification of Pegylated Interferon Alfa-2b in human serum using signature peptide-based quantitation.

A sensitive method for determination of PEG-IFN-α-2b in human serum was developed using ultra performance liquid chromatography aligned with tandem mass spectrometric detection. A two-treatment, two-period, cross over study was conducted to establish bioequivalence between a test and reference formulation and the method was successfully applied to the quantification of PEG-IFN-α-2b in serum samples of this clinical study. The sample concentrations obtained from LC-MS/MS technique were compared with the concentrations obtained from ELISA technique. PEG-IFN-α-2b was isolated from serum using protein precipitation technique with isopropyl alcohol followed by overnight tryptic digestion. The signature peptide formed as result of tryptic digestion was separated on a chromatograph and detected using a mass detector. The mass transition ion-pair of m/z 741.3 → 1047.1 for PEG-IFN-α-2b and m/z 387.4 → 205.2 for internal standard were used for MS/MS detection. The sample extraction involves a simple protein precipitation method followed by tryptic digestion of the supernatant and further sample cleanup was not needed. The method has been validated over a linear range of 1.028-3200 ng/mL with a correlation coefficient ≥ 0.99. The precision (%RSD) was 5.52 to 7.90 and accuracy (%RE) was within -1.80 to 1.68. The total run time was 22.0 min. The sensitivity of LC-MS/MS method was 1.0 ng/ml which was found to be more sensitive than ELISA and resulted in improving the overall study data by being able to quantify all the samples without any below LOQ results helping to further improve the pharmacokinetic modeling. This improved method is a promising anti-body free LC-MS/MS based methodology for estimation of PEG-IFN-α-2b in human serum and may be applied for other such pegylated molecules.

Considerations for the selection of co-formers in the preparation of co-amorphous formulations.

Co-amorphous drug delivery systems are evolving as a credible alternative to amorphous solid dispersions technology. In Co-amorphous systems (CAMs), a drug is stabilized in amorphous form using small molecular weight compounds called as co-formers. A wide variety of small molecular weight co-formers have been leveraged in the preparation of CAMs. The stability and supersaturation potential of prepared co-amorphous phases largely depend on the type of co-former employed in the CAMs. However, the rationality behind the co-former selection in co-amorphous systems is poorly understood and scarcely compiled in the literature. There are various facets to the rational selection of co-former for CAMs. In this context, the present review compiles various factors affecting the co-former selection. The factors have been broadly classified under Thermodynamic, Kinetic and Pharmacokinetic-Pharmacologically relevant parameters. In particular, the importance of Glass transition, Miscibility, Liquid-Liquid phase separation (LLPS), Crystallization inhibition has been deliberated in detail.

Dronedarone HCl-Quercetin Co-Amorphous System: Characterization and RP-HPLC Method Development for Simultaneous Estimation.

BACKGROUND: Dronedarone HCl (DRN) is an anti-arrhythmic drug indicated for atrial fibrillation. DRN has a low solubility of 2 µg/mL and 4% bioavailability, thus it is formulated as a co-amorphous system to enhance its solubility by using quercetin (QCT) as a co-former. A sensitive, accurate, and economic method for the simultaneous quantification of DRN and QCT in formulation is not found in the literature. OBJECTIVE: To develop a Reverse Phase -HPLC method for the simultaneous estimation of DRN and QCT in a DRN-QCT co-amorphous system. METHOD: The co-amorphous system was prepared using a solvent evaporation technique with DRN and QCT in a 1:1 molar ratio. The separation was achieved on a Purospher® STAR C18 (250 mm × 4.6 mm × 5 µm id (internal diameter)) column with the mobile phase comprising of acetonitrile and a 25 mM phosphate buffer pH 3.6 (60:40%, v/v). RESULTS: DRN and QCT were retained on the column for 6.7 and 3.5 min, respectively. For both molecules, the method was developed with a wide linearity range of 0.2-500 µg/mL. The LOD for DRN was found to be 0.0013 µg/mL and for QCT it was found to be 0.0026 µg/mL. The LOQ for DRN was found to be 0.0041 µg/mL, and for QCT it was 0.0078 µg/mL. CONCLUSIONS: The method was validated as per International Conference on Harmonization (ICH) guidelines for linearity, precision, accuracy, and robustness. The method was used in simultaneous quantification of DRN and QCT in co-amorphous samples. HIGHLIGHTS: The method developed was used for the analysis of content uniformity and solubility samples of co-amorphous system, where the method was able to successfully quantify DRN and QCT. Low detection and quantification limits contribute to the sensitivity of the method and wide linearity range assures the robust and precise quantification of molecules.

Overview of Extensively Employed Polymeric Carriers in Solid Dispersion Technology.

Solid dispersion is the preferred technology to prepare efficacious forms of BCS class-II/IV APIs. To prepare solid dispersions, there exist a wide variety of polymeric carriers with interesting physicochemical and thermochemical characteristics available at the disposal of a formulation scientist. Since the advent of the solid dispersion technology in the early 1960s, there have been more than 5000 scientific papers published in the subject area. This review discusses the polymeric carrier properties of most extensively used polymers PVP, Copovidone, PEG, HPMC, HPMCAS, and Soluplus® in the solid dispersion technology. The literature trends about preparation techniques, dissolution, and stability improvement are analyzed from the Scopus® database to enable a formulator to make an informed choice of polymeric carrier. The stability and extent of dissolution improvement are largely dependent upon the type of polymeric carrier employed to formulate solid dispersions. With the increasing acceptance of transfer dissolution setup in the research community, it is required to evaluate the crystallization/precipitation inhibition potential of polymers under dynamic pH shift conditions. Further, there is a need to develop a regulatory framework which provides definition and complete classification along with necessarily recommended studies to characterize and evaluate solid dispersions.

Evaluation of selected pharmaceuticals and personal care products in water matrix using ion trap mass spectrometry: A simple weighted calibration curve approach.

A novel analytical method is presented for 12 target pharmaceutical and personal care products (PPCPs), belonging to different classes like antibiotics, non-steroid anti-inflammatory drugs, parabens, UV-filters, plasticizer, and antibacterials. The method development comprises of solid-phase extraction (SPE) with lipophilic-hydrophilic material balanced Oasis HLB cartridge, followed by reverse-phase liquid chromatography interfaced to linear ion trap tandem mass spectrometry (LC-MS/MS) with electrospray ionization. Chromatographic separation was achieved with a gradient elution of 25 min run time using 5 mM ammonium acetate buffer with pH adjustment using acetic acid. In addition, cost effective organic solvent with buffer used together as the mobile phase with Chromatopak C18 column (150 mm × 4 mm, 5-µm,) in negative ionization mode. Recoveries ranged from 61.74 % to 119.89 % for most of the compounds. Matrix-matched calibration curves were used for counterbalancing the matrix effects for all the analytes, and ibuprofen D3 internal standard was used for assessing the effectiveness of extraction technique and monitoring the recovery of sample analysis. Simple empirical weighted linear regression curve technique was adopted practically for each analysis in enhancing the analyte accuracy at lower quantification level. The 1/x2 model was selected as the best suitable model for quantification of analytes, which can be evaluated by deviation from back-calculated concentration in terms of percentage relative error (%RE). Weighted calibration curves with regression value for most of the compounds were ≥ 0.98, except triclosan with a regression value ≥ 0.93. Precision showed as % relative standard deviation (%RSD) were always below 15.0 %. Accuracy-test was evaluated by the statistical one-sample t-test and no significant difference was observed between nominal and experimental value. The limit of quantification (LOQ) ranged from 3.0 ng/mL (BP1) to 1000 ng/mL (naproxen). Finally, the validated method was used for the first time to determine target analytes in surface water samples collected from Arkavathi river flowing across southern India's Bengaluru city.

Complex Generic Products: Insight of Current Regulatory Frameworks in US, EU and Canada and the Need of Harmonisation.

The regulatory agencies all over the world have defined the pathway and regulations for the approval of simple small-molecule generics. In addition, the agencies are striving to form perspicuous regulatory frameworks for the approval of biosimilars. In this view, there are no defined regulations for the approval of complex generics, also known as non-biological complex drugs (NBCDs). Complex drugs are large, highly complex and synthetic moieties and are made of complex active substances but are different from biologics product. Regulatory frameworks being adopted for complex generics today are questionable and ambiguous. The market for complex generics is huge and there are fewer generic competitors in this area. In addition, the cost of bringing such generics into the market is high. Since the complex generics are largely used for chronic and life-threatening diseases and the competition is less, generic players show high interest in this segment. Thus, there is a need for a well-defined pathway and guidance documents for the authorization of generic versions of complex drug products. The article focuses on the regulatory frameworks currently adopted by US, EU and Canada for bringing complex generics into the market. It also describes on the regulatory disparities existing among the three agencies in the light of complex generics.